7.3.3.1.1.1.1 Archive display
fig. 7.8
If you leave the screen using the 'Back' button, the archive 'Circuit Selection' screen appears
again.
7.3.4
Circuit Parameters
fig. 7.9
7.3.4.1 Area selection
fig. 7.10
After leaving the picture with button „Back "you see again the „Main Screen".
7.3.4.1.1
Circuit selection
fig. 7.11
After leaving the picture with button „Back" you see again the Parameter „Area selection".
417101634_Lubo-DryExx_Advanced
This screen displays the following information:
•
Circuit number
•
System number
•
Sequential valve number
•
Selected archive
•
Consumption values
•
To leave the 'Archive for Circuit xx' screen:
Press "ESC"
OR
•
To go to "Monthly archive part 2
Press Button ""
OR
•
To go to the 'Start' screen:
Press "
"
•
To go to the 'Circuit Parameters' screen:
Press 'Circuit Parameters'
The screen only displays Area if the valves are
allocated.
•
To go to the "Area Selection"
Press "Area xx"
•
To leave the "Area selection"
Press 'Back'
OR
•
To go to the 'Start' screen:
Press "
"
The screen only displays Area if the valves are
allocated.
•
To go to the "Parameter display"
Press "circuit xx"
•
To leave "Circuit selection"
Press 'Back'
OR
•
To go to the 'Start' screen:
Press "
"
- 43 -
Rev. 07-01.15