Overview: System Control For Dryexx ® Systems; Dryexx ® Small; Dryexx ® Basic; Dryexx Advanced - ECOLAB Lubo-DryExx Advanced Betriebsanleitung

4.5 Overview: System Control for
®
4.5.1 DryExx Small
a simpler variant for the smaller
The control unit is based on a Unitronics JAZZ! and is contained in a plastic housing.
A record of hours run for all lubrication circuits is available.
®
4.5.2 DryExx Basic
Based on a Unitronics Vision 130 in a stainless steel housing and carries out control
tasks for DryExx
each lubrication circuit can be called up via the operating console. As an option, a
hopper reservoir meter and a flow meter for recording usage can be fitted and called up
via the operating console.
®
4.5.3 DryExx Advanced
This is based on a Siemens S7-300 with a monochrome Touch Panel TP 177B
widescreen contained in a stainless steel housing.
lubrication circuits in a maximum of 10 installations can be connected. The lubrication
circuits in the installations can be individually controlled. A record of hours run is made
for each lubrication circuit and can be called up via the TP. As an option one hopper
reservoir meter can be connected per installation. Alternatively, usage amounts can be
recorded by a flow meter and also called up via the TP.
®
4.5.4 DryExx Advanced DP
This is based on a Siemens S7-300 with a monochrome Touch Panel TP 177B
widescreen contained in a stainless steel housing.
lubrication circuits in a maximum of 10 installations can be connected. The lubrication
circuits in the installations can be individually controlled. A record of hours run is made
for each lubrication circuit and can be called up via the TP. As an option one hopper
reservoir meter can be connected per installation. Alternatively, usage amounts can be
recorded by a flow meter and also called up via the TP. Enable signals are controllable
over Profibus-DP.
®
4.5.5 DryExx Advanced ETH
This is based on a Siemens S7-300 with a monochrome Touch Panel TP 177B
widescreen contained in a stainless steel housing.
lubrication circuits in a maximum of 10 installations can be connected. The lubrication
circuits in the installations can be individually controlled. A record of hours run is made
for each lubrication circuit and can be called up via the TP. As an option one hopper
reservoir meter can be connected per installation. Alternatively, usage amounts can be
recorded by a flow meter and also called up via the TP. Enable signals are controllable
over Ethernetbus.
®
4.5.6 DryExx Universal
®
DryExx Universal
®
DryExx type in the "container on stainless steel chains" application. The control is
based on a Siemens S7-300 PLC with Panel TP177B in the stainless steel housing and
controls all the times, clocks, runs and messages necessary for the process in
systems with up to 48 lubrication and cleaning circuits on 3 dosing units in the full
extension state. The
"Lubo-DryExx
417101634_Lubo-DryExx_Advanced
DryExx
DryExx
®
systems with up to 8 lubrication circuits. The record of hours run for
is a modular control center for dry belt lubrication systems of the
®
DryExx Universal
®
" dosing units.
®
Systems
®
installations with up to 6 lubrication circuits.
DryExx
DryExx
DryExx
control center operates exclusively with our
- 36 -
®
systems with up to 16
®
systems with up to 16
®
systems with up to 16
DryExx
Rev. 07-01.15
®