VOLTCRAFT VC232 Bedienungsanleitung Seite 82

Measuring tolerances
Accuracy in ± (% of reading + display error in counts (= number of smallest points)).
These accuracy readings are valid for one year at a temperature of +23 °C (± 5
°C) and a relative humidity of less than 75 % (non-condensing). If the multimeter is
used outside of this temperature range, use the following coefficient to calculate the
accuracy +0.1 x (specified accuracy)/1 °C.
The accuracy of measurements may be affected when the multimeter is used in a
high-frequency electromagnetic field.
Direct voltage (V/DC)
1
Range
200.0 mV
2.000 V
20.00 V
200.0 V
600 V
Specified measuring range: 5–100% of the measuring range
600 V overload protection; Impedance: 10 MΩ (mV: ≤100 MΩ)
The multimeter may display ≤5 counts if a measuring input is short-circuited.
Direct voltage (V/DC) LoZ
2
Range
2.000 V
20.00 V
200.0 V
600 V
82
Resolution
0.1 mV
0.001 V
0.01 V
0.1 V
1 V
Resolution
0.001 V
0.01 V
0.1 V
1 V
Accuracy
±(0.9% + 8)
±(0.9% + 4)
±(1.3%+7)
Accuracy
±(1.7% + 7)