General Description; Extent Of The Delivery; Functional Description; Overview - Parkside PMNF 1500 A1 Originalbetriebsanleitung

General description

­See­the­fold-out­pages­for­
illustrations.

Extent of the delivery

Carefully unpack the appliance and check
that it is complete. Dispose of the packag-
ing material correctly.
-­ Device
-­ 2­cutting­disks­(pre-mounted)
-­ Vacuum­adapter­(pre-mounted)
-­ Reducing­adapter­for­vacuum
-­ Chuck­key
-­ Hand­chisel
-­ Storage­case
-­ Instructions­for­use

Functional description

The wall chaser cuts two grooves in brick-
work using two parallel diamond cutting
disks, without requiring the use of water.
Cabling grooves can be opened up by
removing the material in between the
grooves.
Please refer to the information from the
disc manufacturer.
Please refer to the descriptions below for
information about the operating devices.

Overview

1 Handgrip
2 On/off switch
3 Switch block
4 Auxiliary handle
­ 5­ Maintenance­coverage
6 Spindle stop button
7 Cutting disc
8 Start roller
9 Vacuum connector
10 Vacuum adapter
11 Hand chisel
12 Chuck key
13 Rotational direction marking
14 Protective guard opening
­ 15­ Mounting­spindle
­ 16­ Threaded­clamping­flange
17 Retaining screw
­18­ Mounting­flange
19 Spacer disks
20 Flange

Technical data

Wall chaser ............ PMNF 1500 A1
Rated input voltage ..........230 V~, 50 Hz
Connected load ........................ 1500 W
Idle­speed­(n) ..........................9000 rpm
Dimension of the
cutting discs ............. Ø 125 x 22,23 mm
Groove depth ......................... 0­-­30­mm­
Groove width ................ 8 mm bis 26 mm
Spindle thread ................................ M14
Safety class ..........
Protection category..........................IP X0
Sound pressure level
) .......................... 94 dB; K
(L
pA
Sound power level (L
measured ............... 105 dB; K
)­
Vibration (a
h
Handgrip .......... 6,1 m/s
Auxiliary handle ..7,5 m/s
The vibration values represent maximum
values which have been determined with
the supplied blade. The actual vibration
values may vary depending on the used
accessories.
The vibration values are still affected by the
handling for the user's.
GB
­II­(Double­insulation)
= 3 dB
pA
)
WA
= 3 dB
WA
2 ; K= 1,5 m/s
; K= 1,5 m/s
2
2
2
23