Safety; Application Compatibility; Proper Utilization; Safety Measures - Mettler Toledo InPro 8000-Serie Bedienungsanleitung

InPro 8000 Series
2.

Safety

2.1

Application compatibility

The wetted material parts of the sensor (shaft, window, window sealing ma-
terial, O-ring) can under circumstance be non-compatible with the particular
composition of the process medium and/or of the operating conditions.
Responsibility to verify application compatibility lies wholly with the user.
The compatibility of different types of material are outlined on
http://www.coleparmer.com/techinfo/chemcomp.asp.
Mettler-Toledo GmbH, Process Ana lytics accepts no responsibility whatso-
ever for the correctness or accuracy of such details.
2.2

Proper utilization

METTLER TOLEDO InPro 8000 Series sensors are intended solely for the
measurement of suspended particles or turbidity in aqueous solutions in
industrial applications.
Any other use, or any operation over and above that intended by the
manufacturer, are deemed to be non-permissible and incorrect, and can
lead to harm or injury to material/equipment and persons. This is also
relevant for applications which do not comply with the technical data of
the sensor. For any damage possibly arising from such misuse, the user
assumes full and sole responsibility.
2.3

Safety measures

The sensors InPro 8000 Series have been manufactured in line with
state-of-the-art technology and in accordance with accepted technical
safety regulations. Nevertheless, the sensors can still represent a source of
risk and danger:
– if the sensors are operated by insufficiently trained personnel,
– if the sensors are employed incorrectly or not as intended by the
manufacturer
– if the sensors are not regularly maintained or serviced.
© 09/2022 METTLER TOLEDO
Printed in Switzerland
9
InPro 8000 Series
52 800 247