Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
en Installation Manual
11
Installation Manual
1
Introduction
Thank you for buying this METTLER TOLEDO product. InSUS™ pH sensors are gamma irradiation-sterilizable,
pre-calibrated single-use pH sensors with an integrated Pt 1000 temperature probe. The sensors have been
designed especially for deployment in single-use bags used in biotechnical processes. The sensors offer a design
that allows safe and easy installation in a standard Eldon James
welded into the bag film prior to sensor installation.
2
Safety Instructions
The sensor contains glass components and should be handled carefully. Local safety regulations are applicable
to the handling of the sensor. Installation and operation should be carried out only by trained personnel and staff
familiar with the unit and who have read and understood this installation manual.
3
Product Description
InSUS 310
1
VarioPin (VP) connector (without protective cap)
2
Sensor label (serial number, factory calibration data)
3
Retainer ring
4
Sensor shaft (HDPE)
5
O-rings (EPDM)
6
Glass elements (reference electrode, pH electrode, and temperature probe)
© 10 / 20 METTLER TOLEDO
Printed in Switzerland
port disc with a 1" barb. This port disc is
®
1
2
3
4
5
5
6
InSUS 307 and InSUS 310 Single-use pH Sensors
en
InSUS 307
30 641 982 A
Werbung
Inhaltsverzeichnis
