InPro 8000 Series
8.
Certificates
8.1
Material certificate
Each sensor with a stainless steel shaft made of DIN 1.4435 or 1.4404
(316L) is delivered with a set of 3.1B certificates (complying with
EN10204.3/1.B). All wetted metal parts are identified with an engraved
symbol corresponding to the heat number on the paper certificate deliv-
eredwith the sensor.
Each wetted metal part is polished in order to get a surface roughness lower
than 0.4 µm (16 µ in). This represents a roughness grade number of N5
(according to ISO1320:1992)
© 09/2022 METTLER TOLEDO
Printed in Switzerland
21
InPro 8000 Series
52 800 247