Certificates; Material Certificate - Mettler Toledo InPro 8000 Serie Bedienungsanleitung

InPro
InFit 761-25 CIP/T 3.1B
InFit 761-25 CIP/TS 3.1B
InFit 761-25 CIP/70 TC 1.5"
InFit 761-25 CIP/70 TC 2"
InTrac 779-M
InTrac 799-M
(H = immersion length)
Housings for InPro 8050:
Designation
InFit 761-25 B PVC
InFit 761-25 B PVDF
InFit 761-25 B PP
InDip 550/1000/PVC/Pg 13.5 PVC
InDip 550/1500/PVC/Pg 13.5 PVC
InDip 550/2000/PVC/Pg 13.5 PVC
InDip 550/2500/PVC/Pg 13.5 PVC
InDip 550/3000/PVC/Pg 13.5 PVC
(H = immersion length)
8.
8.1
© 01/04 Mettler-Toledo GmbH, CH-8606 Greifensee
Printed in Switzerland
Downloaded from www.Manualslib.com
® 8000 Series

Certificates

Material certificate

Each sensor with a stainless steel shaft made of DIN 1.4435 or 1.4404
(316L) is delivered with a set of 3.1B certificates (complying with EN
10204.3/1.B). All wetted metal parts are identified with an engraved sym-
bol corresponding to the heat number on the paper certificate delivered with
the sensor.
Each wetted metal part is polished in order to get a surface roughness lo-
wer than 0.4 µm (16 µ in). This represents a roughness grade number of
N5 (according to ISO1320:1992).
manuals search engine
DIN 1.4435 –
DIN 1.4435 –
DIN 1.4435 70
DIN 1.4435 70
DIN 1.4404 70
DIN 1.4404 92
Material H
PVC 70
PVDF 70
PP 70
1000 120
1500 120
2000 120
2500 120
3000 120
120 Silicon-FDA 52 400 493
120 Silicon-FDA 52 400 502
120 Silicon-FDA 52 400 494
120 Silicon-FDA 52 400 495
205 Viton ® -FDA 52 403 236
297 Viton ® -FDA 52 403 237
a O-ring Order no.
120 Viton ® -FDA 52 400 310
120 Viton ® -FDA 52 400 311
120 Viton ® -FDA 52 400 316
Viton ® -FDA 52 400 320
Viton ® -FDA 52 400 582
Viton ® -FDA 52 400 588
Viton ® -FDA 52 400 594
Viton ® -FDA 52 400 600
InPro
19
® 8000 Series
52 800 247