6.3.5
Alarms and Messages
Fig. 6.9
6.3.5.1 Message displays
Fig. 6.10
6.3.6
Logout
Fig. 6.11
6.3.7
General Parameters
Fig. 6.12
417102248_DryExx_Advanced_AB
•
To go to the "Alarms and Messages"
Press "Alarms + Message"
The following messages are indicated:
•
Fault messages (must be acknowledged)
•
Operating signals
•
HMI-System messages
•
Result of diagnostics
•
Scroll in the messages
Use the „Move up" and „Move down" buttons
•
Leave screen
Press "Close"
• To reset of actual password
Press "Logout"
• To go to the "General Parameters"
Press "Parameter generaly"
- 37 -
Rev.: 2-01.15