Reasonable Foreseeable Incorrect Use; Arbitrary Conversion And Spare Parts Production; Personnel Requirements - ECOLAB EcoPlus PDRX Kurz- Betriebsanleitung

Safety
2.2.1

Reasonable foreseeable incorrect use

To maintain the function, we use this section in particular to draw your attention to ways in
which you may use, according to the risk analysis conducted by the manufacturer, could
result in reasonable foreseeable incorrect use.
n Incorrect use of design versions
(for example incorrect sealing materials, incorrect pump head materials).
n Operational incorrect voltage supplies.
n Excessive back-pressures.
n Excessive ambient temperatures.
n Excessive media temperature.
n Incompatible accessory parts.
n Incorrect dosing lines.
n Line cross-sections too small.
Incorrect ambient temperatures or media temperatures.
n
n Excessive viscosities.
Operation in potentially explosive atmospheres.
n
n Use of unsuitable dosing media.
2.2.2

Arbitrary conversion and spare parts production

CAUTION!
Changes or modifications are not permitted without prior, written permission
from Ecolab Engineering GmbH and result in the forfeiting of any and all
warranty entitlements. Original spare parts and accessories approved by
the manufacturer to increase safety. The use of other parts excludes the
warranty for the resulting consequences. We would like to point out that the
CE conformity expires in case of subsequent conversions
2.3

Personnel requirements

Qualifications
DANGER!
Risk of injury if personnel are inadequately qualified!
If unqualified personnel carry out work or are in the danger area,
dangers may arise which can lead to serious injuries and
considerable damage to property.
All the activities may only be performed by personnel that is qualified and
suitably trained for this purpose.
Keep unqualified personnel away from hazard areas.
417102610 Rev. 01-12.2020 8