Safety Instructions; Symbols And Icons - Parkside PSBS 240 C2 Originalbetriebsanleitung

GB IE
Thickness .................................20 mm
Granulation ....................................36
Velocity v ........................max. 23 m/s
0
Grinding belt
Dimension ...................... 50 x 686 mm
Granulation .............................80/120
Velocity v ................................15 m/s
0
Weight (incl. accessories) .. approx.
Sound pressure level
(L ) ....................84,5 dB(A); K
pA
Sound power level (L
measured ............97,5 dB(A); K
Vibration total value (a
* A break is introduced after 30 minutes of
uninterrupted operating duration until the
device temperature differs 2 K (2 ° C) less
than room temperature.
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
The specifi ed noise emission value has
been measured according to a standar-
dised testing method and may be used for
comparison with another power tool.
The specifi ed noise emission value may
also be used for an introductory assess-
ment of the load.
Warning:
The vibration emission value whilst
actually using the power tool may
vary from the given values depen-
ding on the type and way in which
the power tool is used as well as
the type of workpiece being pro-
cessed in particular..
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
22
7.1 kg
=3 dB
pA
)
WA
=3 dB
WA
) ........ 2.5 m/s
h
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched off
and times when it is switched on but
running without any load).

Safety Instructions

WARNING! When using power
tools, observe the following basic
safety measures for the prevention
2
of electric shocks and the risk of in-
jury and fi re. Please read all these
instructions before using the electric
tools and please keep the safety
instructions.

Symbols and icons

Symbols on the device:
Warning!
Risk of injury from the rotating tool!
Keep hands away.
Risk of electric shock! Disconnect
from the mains before carrying out
maintenance and repair work.
Read the instruction manual.
Wear ear protection.
Wear eye protection.
Wear breathing protection.
Wear cut-resistant gloves.
Never use faulty grinding disks.