Safety Instructions; Symbols And Icons; Symbols In The Manual - Parkside PDOS 200 C2 Originalbetriebsanleitung

GB IE NI
Weight (incl. accessories) ...approx.
Sound pressure level
(L ) ................... 84,5 dB(A); K
pA
Sound power level (L
measured .......... 97,5 dB(A); K
Vibration total value (a
......................................... K = 1,5 m/s
* A break is introduced after 30 minutes of un-
interrupted operating duration until the device
temperature differs 2 K (2 °C) less than room
temperature.
** Do not use attachment tools whose specifi ca-
tions are outside the data provided here.
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
The specifi ed noise emission value has
been measured according to a standar-
dised testing method and may be used for
comparison with another power tool.
The specifi ed noise emission value can
also be used for a provisional assessment
of the load.
Warning:
The noise emissions may deviate
from the specifi ed values during
actual use of the power tool, de-
pending on how the power tool is
being used and, in particular, what
kind of material is being worked
on.
Safety measures for the protection
of the operator are to be determi-
ned that are based on an estimate
of the actual vibration load under
the real operating conditions (for
this, all parts of the operating cycle
are to be taken into account, for
example, times in which the electric
tool is turned off, and those during
6
CY
6.45 kg
= 3 dB
pA
)
WA
= 3 dB
WA
) .......... 2.5 m/s
h
which it is turned on but running
without a load).

Safety Instructions

WARNING!
2
2 When using power tools, observe
the following basic safety measures
for the prevention of electric shocks
and the risk of injury and fi re.
Please read all these instructions
before using the electric tools and
please keep the safety instructions.

Symbols and icons

Symbols in the manual:

Warning symbols with in-
formation on damage and
injury prevention.
Instruction symbols with information
on preventing damage.
Connect the machine
to the power supply.
Pull out the mains plug.
Help symbols with information on
improving tool handling.
Symbols on the device:
Warning!
Risk of injury from the rotating tool!
Keep hands away.
Risk of electric shock! Disconnect
from the mains before carrying out
maintenance and repair work.