Parkside PHSA 20-Li B2 Bedienungs- Und Sicherheitshinweise Seite 24

˜ Storage
Before storage, always:
– Switch the product off, remove the
[ 15 ]
battery pack
down .
– Clean the product (see "Cleaning and
care") .
Secure the safety knife bar
–
[ 12 ]
blade guard
Store the product and its accessories in a
dark, dry, frost-free, well-ventilated place .
Always store the product in a place that is
inaccessible to children .
The ideal long term storage (longer than
3 months) temperature is between +20 and
+26 °C .
Short term storage: Suspending the
product from the wall
m
WARNING! RISK OF ELECTRIC
SHOCK!
When drilling, be careful not to
damage any supply lines . Use
suitable search devices to find these
or consult an installation plan for
guidance .
Contact with electrical cables can
lead to electric shock and fire .
Contact with a gas pipe can result in
an explosion .
Using the motor housing suspension
Fix a screw with a screw head diameter
–
of 8 to 10 mm at the desired position on
a suitable wall .
If the wall consist of bricks, stone or a
–
similar material: Use a dowel to secure
the screw .
Let the screw head protrude from the wall
–
by approx . 10 mm .
22 GB/CY
and let the product cool
2 ] [
in the
.
11 ] [
:
Slide the motor housing suspension
–
over the screw to suspend the product .
Using the blade guard suspension
Fix 2 screws with a screw head diameter
–
of 5 to 6 mm at the desired position on a
suitable wall .
The center to center distance between
the 2 screws should be 17 mm .
If the wall consist of bricks, stone or a
–
similar material: Use dowels to secure the
screws .
Let the screw heads protrude from the
–
wall by approx . 10 mm .
– Slide the blade guard suspension
over the screws to suspend the product .
Battery pack advice
Only store the battery pack
charged . The battery pack should be
charged to 40 to 60 % before storing for
extended periods .
Check the battery pack
every 3 months when storing for extended
periods . Recharge as necessary .
˜ Transportation
Before transportation:
Switch the product off .
–
Remove the battery pack
–
Let the product cool down .
–
Fit the blade guard
–
Protect the product from any heavy impact
or strong vibrations which may occur during
transportation in vehicles .
Secure the product to prevent it from
slipping or falling over .
[ 11 ]
[ 13 ]
:
[ 13 ]
[ 15 ]
partially
[ 15 ]
charge about
[ 15 ]
.
[ 12 ]
.