Parkside PHSA 20-Li B2 Bedienungs- Und Sicherheitshinweise Seite 14

5) Maintain power tools and
accessories. Check for
misalignment or binding of
moving parts, breakage of parts
and any other condition that may
affect the power tool's operation.
If damaged, have the power tool
repaired before use. Many accidents
are caused by poorly maintained power
tools .
6) Keep cutting tools sharp and
clean. Properly maintained cutting tools
with sharp cutting edges are less likely to
bind and are easier to control .
7) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account the working
conditions and the work to be
performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation .
8) Keep handles and grasping
surfaces dry, clean and free from
oil and grease. Slippery handles
and grasping surfaces do not allow for
safe handling and control of the tool in
unexpected situations .
12 GB/CY
Battery tool use and care
Recharge only with the charger
1)
specified by the manufacturer. A
charger that is suitable for one type of
battery pack may create a risk of fire when
used with another battery pack .
2) Use power tools only with
specifically designated battery
packs. Use of any other battery packs
may create a risk of injury and fire .
3) When a battery pack is not in use,
keep it away from other metal
objects, like paper clips, coins,
keys, nails, screws or other small
metal objects, that can make a
connection from one terminal to
another. Shorting the battery terminals
together may cause burns or a fire .
4) Under abusive conditions,
liquid may be ejected from
the battery; avoid contact. If
contact accidentally occurs, flush
with water. If liquid contacts
eyes, additionally seek medical
help. Liquid ejected from the battery may
cause irritation or burns .
5) Do not use a battery pack
for tool that is damaged or
modified. Damaged or modified
batteries exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury .
6) Do not expose a battery pack
or tool to fire or excessive
temperature. Exposure to fire or
temperature above 130 °C may cause
explosion .