Startup; Connecting The Reusable Secretion Canister - Asskea proVisio M28 Gebrauchsanweisung

4.2 Startup

• Take the device and the accessories out of the packaging.
• Always place the device on a sturdy and flat, incline-free surface.
• Prior to the initial startup, it is essential to follow the safety instructions in section 2.6.
• Operate the device only with the inserted bacterial filter and connected secretion canister or
with the disposable secretion canister and the associated adapter.
• Fully charge the battery prior to initial startup.
• Always have one backup bacterial filter (when used with the reusable secretion canister
system) or an additional disposable liner "OneWay" (when used with the disposable secretion
canister system) at hand, since it is absolutely essential for safe operation!
• Prior to each application, check that the reusable secretion canister is completely clean to
avoid frothing.
4.2.1

Connecting the reusable secretion canister

3. Fold the moving part of the secretion canister lid (visioClick
place the secretion canister lid on the secretion canister.
4. Fold the moving part of the secretion canister lid (visioClick
lateral hooks snap into place and the secretion canister is securely closed.
) slightly upwards and
®
Fig. 6
Fig. 7
® ) downwards so that the
Fig. 8
Page 61 of 84
en