Technical Data - Asskea proVisio M28 Gebrauchsanweisung

8 Technical data

Model name
Flow rate* (measured at suction
tube nozzle)
Vacuum
Canister
Suction tube
(item number: 100713-2)
Nominal voltage of the
power supply unit
Maximum load current
Permissible input voltage
Power consumption at 12 V
Degree of protection pursuant
to IEC 60601-1
Risk classification pursuant to
93/42/EEC, IX
Protection class pursuant to
IEC 60601-1
IP degree of protection
CE marking
Sound emission
Ambient conditions
Battery, rechargeable
Charging time
if battery is empty
Energy of battery pack
Power supply unit
Dimensions of device
(H x W x D)
Weight (device)
Operating time
Runtime in battery operation
Expected service life
Item number (REF)
* The information provided may differ depending on the altitude above sea level, the prevailing
air pressure, and the air temperature.
Page 80 of 84
ASSKEA proVisio M28
®
30 l/min ± 2 l/min (high flow)
max. -90 kPa (~ -900 mbar; -675 mmHg) (high vacuum)
Conversion factor: 1 kPa ~ 7.5 mmHg; 1 kPa ~ 10 mbar
Reusable secretion canister (1 l)
disposable liner „OneWay" (1 l)
PVC, inner diameter 6 mm, wall thickness 2 mm,
length 150 cm, vacuum stable up to -0.9 bar
In: AC 100 – 240 V  50-60 Hz / 1.5 A
Out: DC 12 V / 5.0 A
5.0 A
12 V
60 W
Type BF
IIa
II
IP22
CE0494
max. 60 dB(A)
Transport / Storage
Ambient temperature: -25 °C to +70 °C
Relative humidity: up to 90%, non-condensing
Air pressure:
Operation
Ambient temperature: +5 °C to +40 °C
Relative humidity:
Air pressure:
at least 10.8 V; lithium ion battery
at least 2 h
<80 Wh
GTM91099-6015-3.0-T2
213 mm x 210 mm x 124 mm
2.8 kg
5 minutes ON; 5 minutes OFF
approximately 45 minutes,
depending on the runtime of the motor
5 years
100739-MW (with reusable secretion canister system)
100739-EW (with disposable secretion canister system)
700 hPa to 1060 hPa
15% to 90%, non-condensing
700 hPa to 1060 hPa