General Information On Controlling Model Helicopters - Reely Bigfox Bedienungsanleitung

12. General information on controlling model
helicopters
Before operating your model for the first time, you should first get to know the available control options. The model
helicopter is controlled via the two joysticks on the remote control transmitter. The following functions are available:
Pitch function
The pitch function serves to adjust the helicopter's altitude (see Figure 10). Steering is carried out with the left joystick
(see also Figure 1, no. 11). To do this, you can move the joystick up and down from the middle position. Since the
angle of incidence of the two main rotor blades cannot be changed to each other, the flight altitude is adjusted by
changing the speed of the main rotor.
When the joystick is in the middle position, the helicopter hovers at a constant altitude. If you move the joystick up,
the speed of the main rotor will increase and the model helicopter will ascend (see dark arrows in Figure 10). If you
move the joystick down, the speed of the main rotor will decrease and the model helicopter will descend (see light
arrows in Figure 10).
Figure 10
51