Before Operation - Reely Bigfox Bedienungsanleitung

• Although the model helicopter is primarily intended for indoor use, it can also be used outdoors in fine
and windless weather.
• The unauthorised conversion and/or modification of the product is prohibited for safety and approval
reasons.
• This product is not a toy and is not suitable for children under 16 years of age.
• The product must not get damp or wet.
• If you do not have sufficient knowledge of how to operate remote-controlled models, contact an experi-
enced model user or a model club.
• Do not leave packaging material lying around carelessly, as it could become a dangerous plaything for
children.
• If you have any questions that are not answered by these operating instructions, contact us (see
section 1 for contact information) or an experienced technician.
• The operation and use of remote control model helicopters has to be learned! If you have never operated
a model of this kind, start with particular care and get used to the responses of the model to the remote
control commands first. Be patient!
b) Before operation
• Choose a suitable room with enough space to operate your model. If you operate the model for the first
time, the distance between the model and the walls or objects should be as great as possible.
• When switching the model helicopter on, always follow the procedures outlined in the separate section
of these instructions. This ensures that the transmitter and receiver are connected properly and that your
model responds reliably to remote control commands from your transmitter.
• Ensure that no other models are operating at the same transmission frequency (2.4 GHz) within range
of the remote control. Always check whether there are any other 2.4 GHz remote controls that may
interfere with the model.
• Conduct regular checks to verify that the model and remote control are safe to use. Pay attention to any
visible damage, such as broken rotor blades, defective plug connections or damaged cables. All moving
parts on the model should move freely, but there must not be any slackness in the bearing.
• The helicopter battery required for operation must be charged before use.
• Ensure the transmitter batteries have sufficient remaining capacity (watch the battery indicator on the
transmitter display). If the batteries are empty, replace all of them at the same time. Never replace
individual batteries.
40