Reely Bigfox Bedienungsanleitung Seite 52

Yaw function
By turning the main rotor clockwise (seen from the top), a torque acts on the fuselage of the helicopter to turn it
counter-clockwise. Therefore, the tail rotor is designed to counter this rotation of the fuselage. When the joystick for
the pitch and tail function (see Figure 1, no. 11) is in the middle position, the speed of the tail rotor is automatically
high enough for the helicopter to hover steadily in the air and not yaw, i.e. turn around the vertical axis (rotor shaft).
If you move the joystick to the left, the tail rotor speed will decrease and the helicopter fuselage nose will turn to the
left (see dark arrows in Figure 11).
If you move the joystick to the right, the tail rotor speed will increase and the fuselage nose will turn to the right (see
light arrows in Figure 11).
Roll function
With the roll function, you can move the model helicopter sideways to the right and left (see Figure 12). Use the
joystick for bob and roll functions for steering (see Figure 1, no. 4).
If you steer the joystick slightly to the left, the model will move sideways to the left when viewed in the direction of
flight (see dark arrows in Figure 12).
If you steer it to the right, the model will move sideways to the right when viewed in the direction of flight (see light
arrows in Figure 12).
52
Figure 11
Figure 12