Inserting The Helicopter Battery - Reely Bigfox Bedienungsanleitung

d) Inserting the helicopter battery
Insert the charged helicopter battery (1) from behind into
the battery compartment (2) below the landing bows. The
two battery connection cables (3) must face to the rear.
The battery is sized so that it fits precisely into the battery
compartment. No additional retainers are required.
For a better illustration, the cabin cover was removed in
Figure 8. The four conical safety caps must first be re-
moved before removing the cabin cover. You can then
lift the cabin cover off the retaining bolts. Reassemble in
reverse order.
Figure 8
49