Troubleshooting Table - hanseatic TCN14J6D-S Gebrauchsanleitung

Troubleshooting table

Malfunctions can occur in any electrical appliance. This does not necessarily mean that there is
a defect in the appliance. Therefore, please check whether or not you can correct the fault using
the table.
WARNING!
Never try to repair a defective or suspected defective appliance yourself. You can put
your own and future users' lives in danger. Only authorised specialists are allowed to
carry out this repair work
.
Problem
The appliance does not
heat up.
The food is not warm
enough.
The food is too hot.
The tableware is not
warm enough.
The dishes are too hot.
The unit emits a noise
during operation.
The appliance produces
odours.
Possible solutions/tips
The power supply has been interrupted.
• Insert the mains plug correctly into the socket.
• The fuse has popped out; re-insert the fuse.
• Select the operating type
• Select a higher temperature.
• Ensure that the ventilation slots are not covered, to allow the air to
circulate freely.
• Select the operating type
• Set a lower temperature.
• Select the correct operating mode:
plates/bowls.
• Select a higher temperature.
• Set a longer operating time.
• Ensure that the ventilation slots are not covered, to allow the air to
circulate freely.
• Select the correct operating mode:
plates/bowls.
• Set a lower temperature.
• The noise comes from the fan that distributes the warm air evenly
in the Warming drawer. These are normal operating noises.
• With the operating mode
• When heating up for the first time, odours may occur. The odours
are harmless and soon disperse. They are caused by care prod-
ucts used to protect the metal parts.
• Ensure that the room is well-ventilated during initial heating.
Troubleshooting table
.
.
for glasses/cups or
for glasses/cups or
, the fan operates in intervals.
Page EN-17
for
for