Switching The Fabric Tightening Function On And Off - Selve commeo SE Breeze-com Originalbetriebsanleitung

Switching the fabric tightening function on and off

7. Switching the fabric tightening function on and off
The "Tightening" function is switched off in the delivery state or after a works reset. The
"Tightening" function can only be switched on or off from the configuration menu in the
commeo Multi Send.
Note: • The fabric tightening function is executed about 6 seconds after reaching the lower
end position. Any last vibrations caused by the movement of the awning fabric while
the awning is being extended should then have subsided.
• Even when the fabric tightening function is switched on, the lower end position is dis-
played as being 100% fully extended in the visualisation in the commeo Multi Send
and the commeo Home Server.
3 s
The commeo Multi Send is in
SELECT mode.
Select the "Configuration"
parameter with or
confirm with .
The handheld transmitter must first have been set to SELECT
mode. To do this, press the SELECT button for 3 seconds and
select the appropriate SE Breeze-com.
Search for the required
device by pressing the
SELECT button several times.
Select the "Tightening" func-
and tion with or
channel selection buttons
or to switch the tightening
function on or off. Then press
to save the setting.
= switched off
= switched on
Jump to the next selection
menu with
Press
and use the
58
.
to confirm.