Displaying And Changing The Set Wind Sensitivity With A Commeo Handheld Or Wall Transmitter; Displaying The Set Wind Sensitivity - Selve commeo SE Breeze-com Originalbetriebsanleitung

Setting the wind sensitivity
6.2. Displaying and changing the set wind sensitivity with a commeo handheld or wall
transmitter

6.2.1. Displaying the set wind sensitivity

Operation
3 s
1 s
1 s
3 s
After about 5 seconds, the drive briefly moves upwards once or several times. The number of
brief upward movements results in the set wind sensitivity. The value for the wind sensitivity
can be set to between 1 and 5.
Press the SELECT button for 3 seconds to exit SELECT mode.
Movement
Select the transmitter channel on which the SE Breeze-com is pro-
grammed.
Press the SELECT button on the transmitter for 3 seconds.
The transmitter is in SELECT mode.
Move the drive to the lower end position by pressing the DOWN but-
ton.The drive switches off automatically. Release the DOWN button.
Press the DOWN button for 1 second and then release it.
Press the KEINE button for exactly 1 second.
Press the DOWN button for exactly 3 seconds and then release it.
The drive confirms the setup mode with a brief up and down move-
ment.
55
EN