Information About The Drive Features; Intended Use; Characteristics; Selve-Commeo-Radio - Selve commeo SE Breeze-com Originalbetriebsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

Information about the drive features

2. Information about the drive features

The drive type SE Breeze-com may only be used for operating awnings.

To protect the shutter, the drives have a self-programming overload protection function in

the upwards direction after the end limit configuration has been completed.

The airborne noise emission of the drive is significantly less than 70 dB(A). Depending on the

type of system, the noise emitted by the drive may be greater than this level. It can be

reduced by taking appropriate measures (e.g. insulation of the box, using noise protection

plugs, etc.).

All SELVE com drives receive radio signals on the frequency 868.1 MHz.

commeo is a bidirectional radio system that allows data to be stored in both the transmitter

and the receiver. All SELVE-commeo transmitters can be programmed in the drives. Up to

16 transmitters can be programmed in a single motor. Observe the operating instructions for

the transmitter. In commeo operation, the drives can be set for different uses in CONFIGURA-

TION mode. The SE Breeze-com drive is set ex works to "Awning".

Note: Ensure that the control is not installed and operated close to any metallic surfaces or

magnetic fields. Metallic surfaces or metal-coated glass panes within the transmission path

can significantly reduce the range.

Radio systems that transmit on the same frequency can interfere with reception.

Please note that the range of the radio signal is limited by legal provisions and structural con-

ditions.

Inhaltsverzeichnis