Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
C60_2-028_823024_0401-e.p65
59
Changing the
EEPROM in the
BIS C-6002
processor
Location of the
EEPROM
60
Dimensions,
Weight
Operating
Conditions
Enclosure Rating
Connections
BIS C-6002-...-KL2
Connections
BIS C-6002-...-ST11
Electrical
Connections
60
E
BIS C-6002
Changing the EEPROM
To replace the EEPROM, open up the processor as described on
Be sure before opening that the unit is discon-
nected from power..
To avoid damaging the EEPROM, please ob-
serve the requirements for handling electrostati-
cally sensitive components.
The EEPROM is replaced by unplugging and
plugging back into the socket.
BIS C-6002
Technical Data
Housing
Dimensions with read/write head BIS C-65_
Dimensions with adapter BIS C-650
Weight
Ambient temperature
Enclosure rating
Terminal block
Cable entry
Cable diameter
Cable entry
Cable diameter
Conductor size
with ferrules
Integral connector X1 for V
, IN
S
Integral connector X2 for PROFIBUS-DP Input
Integral connector X3 for PROFIBUS-DP Output 5-pin (female)
Supply voltage V
, input
S
Ripple
Current draw
PROFIBUS-DP slave
50.
1
2
3
4
5
6
7
8
S1
Head 1
Head 2
19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
Plastic ABS
ca. 169 x 90 x 35 mm
ca. 185 x 90 x 35 mm
approx. 500 g
0 °C to + 50 °C
IP 65 (with read/write head)
19-pin
2 x PG 11 fittings (metal)
5 to 10 mm
1 x PG 9 fittings (metal)
4 to 8 mm
0.14 to 1 mm
2
2
0.25 to 0.34 mm
5-pin (male)
5-pin (male)
DC 24 V ± 20 %
≤ 10 %
≤ 400 mA
Terminal block, electrically isolated
S2
E
59
Werbung
Inhaltsverzeichnis
