Introduction Bis C Identification Systems - Balluff BIS C-60 2 Serie Handbuch

C60_2-028_823024_0401-e.p65
5
Principles
Applications
6
System Components The main components of the BIS C Identification Systems are:
Configuration with
BIS C-6002
processor
Schematic
representation of an
Identification System
(example)
6 E
Introduction
BIS C Identification Systems
This manual is designed to assist the user in setting up the control program and installing and
starting up the components of the BIS C Identification System, and to assure rapid, trouble-
free operation.
The BIS C Identification Systems belongs in the category of
non-contact systems for reading and writing.
This dual function permits applications for not only transporting information in fixed-program-
med data carriers, but also for gathering and passing along up-to-date information as well.
If 2 read/write heads are connected to a BIS C-60_2 processor, both heads can be operated
independently of each other. This means for example that you can read a data carrier from one
head while writing to another data carrier at the other head.
Some of the notable areas of application include
– for controlling material flow in production processes
(e.g. in model-specific processes),
for workpiece conveying in transfer lines,
in data gathering for quality assurance ,
for gathering safety-related data,
– in tool coding and monitoring;
– in equipment organization;
– in storage systems for monitoring inventory movement;
– in transporting and conveying systems;
– in waste management for quantity-based fee assessment.
Introduction
BIS C Identification Systems
– Processor,
– Read/Write Heads and
– Data carriers
Processor BIS C-6002
with
adapter
Processor BIS C-6002
with
read/
write head
1 ) BIS C-3_ _ series, except BIS C-350 and -352
PROFIBUS-DP
Processor BIS C-6002
with
adapter
Read/write
2)
head
Data carriers BIS C-1_ _-...
2 ) only BIS C-350 or -352
E 5
Read/write
1)
heads