Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BTL BNC_ 00- _ _ _ _ -B15A _010-000S92 / BTL ZNC_ 00- _ _ _ _ -B15A _010-000S92
Magnetostrictive Linear Position Sensor – Rod Style
1
About this guide
1.1
Validity
This guide provides all the information required for the safe
use of the BTL magnetostrictive linear position sensor with
analog current and voltage interface.
It applies to the following models ( see Type code on
page 18):
–
BTL BNC_ 00- _ _ _ _ -B15A _010-000S92
–
BTL ZNC_ 00- _ _ _ _ -B15A _010-000S92
Read this guide and the other applicable documents
completely before installing and operating the product.
Original User's Guide
This guide was created in German. Other language
versions are translations of this guide.
© Copyright 2021, Balluff GmbH
All contents are protected by copyright. All rights reserved,
including the right to reproduce, publish, edit and translate
this document.
1.2
Other applicable documents
Additional information about this product can be found at
www.balluff.com on the product page, e.g. in the
following documents:
–
Data sheet
–
Declaration of Conformity
–
Disposal
1.3
Symbols and conventions
Individual actions are indicated by a preceding triangle.
► Instruction 1
Action sequences are numbered consecutively:
1. Instruction 1
2. Instruction 2
Note, tip
This symbol indicates general notes.
4
english
1.4
Explanation of the warnings
Always observe the warnings in this guide and the
measures described to avoid hazards.
The warnings used here contain various signal words and
are structured as follows:
SIGNAL WORD
Type and source of the hazard
Consequences if not complied with
► Measures to avoid hazards
The individual signal words mean:
NOTICE
Identifies a danger that could damage or destroy the
product.
DANGER
The general warning symbol in conjunction with the
signal word DANGER identifies a hazard which, if not
avoided, will certainly result in death or serious injury.
Werbung
Kapitel
Inhaltsverzeichnis
