Application
en
®
3. Connect the monitor to the S-Video or HDMI output on the rear of the C-HUB
II.
6.4 Multifunctional button of the video laryngoscope
Both single-image capture and video recording can be activated using the multifunctional
button (3) on the video laryngoscope. Documentation with the multifunctional button of the
®
®
video laryngoscope can be performed on the C-MAC
monitor 8403 ZX and C-MAC
PM
®
8403 XD. About 5 seconds after each time the C-MAC
PM is switched on, a blue information
bar is displayed at the top of the screen for a few seconds. The remaining memory capacity in
minutes is shown on the left-hand side, while the name of the directory in which the saved data
is stored is shown on the right.
®
Instruction For Use • C-MAC
Video Laryngoscope 8403xxx and Connection Cable 8403X • 96076019D • V4.3
72