6 Application
6.1 Connection to the C-MAC
The video laryngoscopes 8403 xxx can only be connected to the C-MAC
ZX. Older monitor types (8402/8401 ZX) are not compatible.
1. Connect the video connecting cable (6) to the socket (2) of the video laryngoscope. The
orientation pin on the plug and socket facilitates connection.
2. Make sure that the cable is fully inserted. There must not be a visible gap.
Connect the video connecting cable coming from the video laryngoscope to the
connection socket (12) (primary connection) or the connection socket (11) of the C-MAC
monitor.
11
The Monitor 8403 ZX enables two CMOS video units from KARL STORZ to be connected with
Lemo connectors. Video units from other manufacturers cannot be connected.
®
Instruction For Use • C-MAC
2
6
12
Video Laryngoscope 8403xxx and Connection Cable 8403X • 96076019D • V4.3
®
monitor
Application
®
monitor 8403
®
67
en