Connection To The C-Mac Pocket Monitor - Storz C-MAC 8403 Serie Gebrauchsanweisung

If two cameras are connected, the user must select the camera for which the images are to be
displayed in the menu (refer to the instruction manual for the C-MAC
96076008D).
en
6.2 Connection to the C-MAC
Instruction For Use • C-MAC
Switch on the monitor by pressing the power switch (18). The green power switch lamp
(17) on the monitor and the blue multi-function button (3) of the video laryngoscope go on.
ð The video laryngoscope is immediately ready to operate. As soon as the photo/video
recording function is ready, the multi-function button (3) goes on.
The 8403 xxx video laryngoscopes can only be connected to the C-MAC
The 8401 XD model is not compatible.
Note the instruction manual of the C-MAC
®
1. Connect the C-MAC PM with the socket (2) of the video laryngoscope blade. The
orientation pin on the plug and socket facilitates connection.
2. Make sure that the plug is fully inserted. There must not be a visible gap.
3. The monitor can also be opened up when connecting both components.
ð The video laryngoscope is immediately ready to operate. As soon as the photo/video
recording function is ready, the multi-function button (3) goes on.
2
®
Video Laryngoscope 8403xxx and Connection Cable 8403X • 96076019D • V4.3
17
18
3
®
pocket monitor
®
PM 8403 XD (Art. No. 96076020D).
Application
®
monitor 8403 ZX Art. no.
®
PM 8403 XD.
68