leco TECO 680 Betriebsanleitung Seite 82

CAUTION
Do not use the machine without the guard and do not tamper with the safety device.
WARNING
Do not clean or wash the wheels mounted on the machine with compressed air or jets
of water.
CAUTION
When working, never use equipment not manufactured by the manufacturer.
CAUTION
Get to know your machine: The best way to prevent accidents and obtain top perform-
ance from the machine is to ensure that all operators know how the machine works.
Learn the function and location of all the controls.
Carefully check that all controls on the machine are working properly.
To prevent accidents and personal injury, all the equipment must be correctly installed,
correctly operated and correctly serviced.
PoSiTion oF THE oPEraTor
In fig. 11b are the positions occupied by the operator during the various work phases:
A Mounting / disassembling operations, launch, dimension detection (where provided)
and wheel balancing
b Machine programs selection
In this way, the operator is able to perform, monitor and verify the outcome of each wheel
balancing and intervene in case of unforeseen events.
82
B
Operator's manual TECo 680 - 680 PlUS - 680 PlUS Pl
A
11b