leco TECO 680 Betriebsanleitung Seite 113

OPT ON; activates the OPT warning.
- Press the Enter button to select the icon desired .
- Press the Exit button to save the setting and exit .
The selection can also be seen in the working screen status line.
Preferred programme configuration
Allows two preferred icons to be set on the main icon bar.
EN
After the list of the configuration programmes is displayed, proceed as follows:
- select the preferred programmes icon ;
- all the utility and balancing programme icons are displayed;
- select the two programmes to be displayed in the main window by using the Enter
;
button
- press the Exit button to save the setting and exit .
Language configuration
The language of the messages displayed on the monitor can be selected.
After the list of the setting programmes is displayed:
- Select the Language setting icon.
- A list of flags is displayed. Select the flag corresponding to the desired language by
pressing the Enter button.
- Press the Exit button to save the setting and exit .
This programme can be exited only by selecting a language, then the unbalance image
is displayed again.
Customisation Configuration
This programme allows the user to save some selected data permanently, e.g. name,
city, address, telephone number, advertising messages, etc..
The data will subsequently be displayed on the initial image.
Operator's manual TECo 680 - 680 PlUS - 680 PlUS Pl
113