leco TECO 680 Betriebsanleitung Seite 106

Note: each time the machine is switched on, if the Weight Right suite has been
activated, the Fast wheel programme is automatically set.
At this point it is possible to perform the wheel balancing, using the required balancing
programme.
At the end of the spin, if the wheel balancing is not satisfactory, a screen will display the
values of the weights to be applied to the inner and outer sides of the rim.
If, on the other hand, the wheel balancing is satisfactory, the icons
in place of the weight values. Within the unbalance indicators, there are two semicircular
bars showing the residual torque unbalance level (left-hand indicator) and the residual
static unbalance level (right-hand indicator).
To visualise the statistics relating to the use of the Weight Right, it is necessary to select
the Statistics icon.
The displayed screen shows:
• the counter of all spins performed during the entire working life of the machine,
• the count of the weight quantity (spring and adhesive) saved during the entire work-
ing life of the machine
106
;
Operator's manual TECo 680 - 680 PlUS - 680 PlUS Pl
are displayed