Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Signs; Identification Label; Main Components - Stiga MP2 500 Li D48 Serie Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für MP2 500 Li D48 Serie:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 57
they could fall off and injure themselves or
compromise safe driving by the operator.
– Letting oneself be transported by the machine.
– Using the machine to tow or push loads.
– Using the cutting means on surfaces other than grass.
– Use the machine for leaf or debris collection.
– Using the machine to trim hedges, or for
cutting vegetation other than grass.
– Use of the machine by more than one person.
IMPORTANT Improper use of the machine will
invalidate the warranty, relieve the Manufacturer from
all liabilities, and the user will consequently be liable
for all and any damage or injury to himself or others.
3.1.3
User types
This machine is intended for use by consumers,
i.e. non-professional operators.
It is intended for "DIY" use only.
IMPORTANT The machine must
be used by one operator.
3.2

SAFETY SIGNS

The machine has various symbols on it (Fig.2.0).
Their function is to remind the operator of the correct
conduct for use, with due care and caution.
Meaning of symbols:
Warning. Read the instructions
before operating the machine.
Danger! Risk of thrown objects.
Keep all persons away from the
work area whilst working.
Only for lawn mowers with thermal engine.
Danger! Danger of cutting yourself.
Cutting means in motion. Do not
put hands or feet near or under the
opening of the cutting means.
Be careful when using the sharp
cutting means. Do not put hands or
feet near or under the opening of the
cutting means. The cutting means
continues to turn even after the motor
has been switched off. Remove the
safety key (deactivation device) before
any maintenance is carried out.
IMPORTANT Any damaged or illegible
decals must be replaced. Order replacement
decals from an Authorised Service Centre.
3.3

IDENTIFICATION LABEL

The identification label holds the following data (Fig.1.0).
1.
Sound power level.
2.
CE conformity marking.
3.
Year of manufacture.
4.
Type of machine.
5.
Serial number.
6.
Name and address of Manufacturer.
7.
Article code.
8.
Max. motor operation speed.
9.
Weight in kg.
10. Power voltage and frequency.
11. Electrical protection rating.
12. Nominal power.
Write the identification data of the machine in the specific
space on the label on the back of the cover page.
IMPORTANT Quote the information on
the product identification label whenever you
contact an Authorised Service Centre.
IMPORTANT The example of the Declaration of
Conformity is provided on the last pages of the manual.
3.4

MAIN COMPONENTS

The machine is composed of a series of main
components that have the following functions (Fig.1.0):
A.
Chassis: this is the casing that houses
the rotating cutting means.
B.
The engine: drives both the cutting means
and the wheel traction (if available).
C.
Cutting means: the element
designed to cut the grass.
D.
Rear discharge guard: it is a safety device which
prevents objects collected by the cutting means
from being projected away from the machine.
E.
Rear discharge chute (if available): apart from
discharging the grass on the ground, at the back,
it also constitutes a safety element, preventing
any objects collected by the cutting means
from being projected away from the machine.
F.
Side discharge guard (if available): it
is a safety device which prevents objects
collected by the cutting means from being
projected away from the machine.
G.
Side discharge chute (if available): apart from
discharging the grass on the ground laterally,
it also constitutes a safety element, preventing
any objects collected by the cutting means
from being projected away from the machine.
H.
Grass catcher: apart from collecting
the mown grass, the grass catcher also
constitutes a safety element, preventing any
objects collected by the cutting means from
being projected away from the machine.
I.
Handle: this is the operator's work station.
It is long enough to ensure the operator
remains at a safe distance from the
rotary cutting means whilst working.
J.
Battery (if it is not supplied with the machine,
see chapter 15 "attachments on request"):
provides the energy for starting the motor;
its specifications and regulations for use
are described in a specific manual.
EN - 4

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis