Fitting The Cutting Unit To The Machine - Ransomes HR300 Kubota D1105T Sicherheits-, Bedienungs- Und Wartungshandbuch

9. Under no circumstances must the engine be started without the operator seated on the tractor.
10. Do not operate tractor or attachments with loose, damaged or missing components.
7.4

FITTING THE CUTTING UNIT TO THE MACHINE _______________________

1. With the lift arms (A) in the lower position align deck mounting brackets (B) with the self aligning bearings.
2. Fit pivot pins (C) and secure with cotter pins and rings.
3 Connect hydraulic Quick relase hydraulic hoses to tractor unit.
4. See section 9.3 to set height of cut.
DO NOT USE ON SLOPES GREATER THAN 19°
WARNING
OPERATION 7
C
B
A
en-52