8.11
REAR HUB NUT LOCK- APPLICATION AND INSPECTION _______________
The Hub Nut Lock is a quick visual indicator to the
security of the Hub Nut. Due to its design and
colouring the Hub Nut Lock is easily visible from a
distance even when the tractor unit is in use or is
parked.
Daily:
Visual checks must be conducted to check that
the Wheel Nut Locks are in place. If missing
replacement components must be sourced before
using the equipment.
8.12
MACHINE MAINTENANCE _________________________________________
Other Regular Service.
•
Verify proper operation of safety interlock switches (Seat switch, etc.)
•
Ensure nuts and bolts remain tight.
•
visually inspect for hydraulic leaks.
•
Keep engine bay clear of debris.
•
Keep tyre pressure at correct level. See section 4
•
Follow the engine manufacturer's maintenance recommendations.
•
If a label becomes worn or removed, see the LABELS section of this manual or the tractor Parts Manual for
replacement information.
NOTE: When washing machine with pressure spray washers or steam cleaners, avoid washing bearing areas
because cleaning solutions might penetrate bearing seals and cause premature bearing failure.
Storage
•
Store petrol or diesel fuel in an approved container in a cool dry place.
•
Keep the machine and fuel containers in a locked storage place to prevent tampering and to keep children
from playing with them.
•
Do not store fuel or petrol/diesel fuel powered equipment in any closed area where heating appliances,
pilot lights or any sort of open flame is present.
•
Before storing, allow the engine to cool, and drain fuel completely from fuel tanks and containers.
•
Maximum safety and best mowing results can only be expected if the mower is maintained and operated
properly.
MAINTENANCE AND LUBRICATION 8
D
C
A
Wheel Rim
B
Hub Nut
C
Hub Nut Lock
D
Hub Nut Lock Screw
A
B
en-70