Slope Warning Screens - Ransomes HR300 Kubota D1105T Sicherheits-, Bedienungs- Und Wartungshandbuch

6 CONTROLS
6.2H.7

SLOPE WARNING SCREENS_______________________________________

NOTE
Slope warning screens will only appear when TST is installed.
During work if the machine is driven onto a slope of 19º the
19°
screen will display this warning which over rides all other
information, and will continue until the machine has been
driven to an area of less than 16º
15
If the slope angle reaches 22º the screen shows this warning.
The display indicates that the cutting deck rotation cannot be
started or restarted and the deck lift / lower is prevented. An
22°
audible warning will also be given, the buzzer will sound four
times every 4 seconds and the red LED's will flash four times
every 4 seconds. The warning continues until the machine
has been driven to an area of less than 16º.
15
If the slope angle reaches 25º, the screen shows this
warning. The display indicates that the cutting units stop and
deck lift / lower is prevented. A continuous audible warning
is given and the red LED's flash continuously. The warning
25°
continues until the machine is driven to an area of less than
16º.
15
en-39