6 CONTROLS
6.1K
UNIT LIFT/LOWER SWITCH _______________________________________
To lower the lift arms move the switch lever
forward.
To raise the lift arms move the switch lever
rearwards
6.1L
WEIGHT TRANSFER SWITCH ______________________________________
The switch is blue and will transfer weight hydraulically
between the drive wheels and the cutter deck.
It is possible to adjust the amount of weight transfer
manually on the lift valve. See section 9.2.
6.1M
CUTTER PERFORMANCE INDICATOR LAMP _________________________
Colour Red, illuminated when the cutter blades are
stalling. If the lamp (M) illuminates it indicates the cutter
blades have stalled. If this happens the forward speed of
the machine must be reduced until the lamp goes out. The
light will not go off if the blades are jammed; if this occurs
the obstruction must be removed with the engines
switched off.
en-43
M