Wd In Reverse Switch; Light Switch (Optional); Auxillary Hydraulic Services Kit Switch (Optional); Cutting Unit Switch - Ransomes HR300 Kubota D1105T Sicherheits-, Bedienungs- Und Wartungshandbuch

6.1F

CUTTING UNIT SWITCH___________________________________________

To commence cutting ensure speed limiter is in mow
position and the units have been lowered.
Push bottom of the rocker switch and move joystick
towards the lower position.
To stop cutter unit rotation push top of rocker switch.
Cutting units stop rotating automatically when raised or the
operator leaves the seat.
6.1G

4 WD IN REVERSE SWITCH _______________________________________

Engages 4 wheel drive whilst the vehicle is reversing.
The switch must be held to engage.
6.1J

LIGHT SWITCH (OPTIONAL) _______________________________________

Switches the road lights on and off.
Position 1. OFF
Position 2. Side / Marker Lights
Position 3. Main Beam.
Note; Position 3 requires ignition to be on.
6.1K

AUXILLARY HYDRAULIC SERVICES KIT SWITCH (OPTIONAL) __________

Used to slew the rotary brush or snow blade in a clockwise
or anticlockwise direction.
Push top of the rocker switch to slew in a clockwise
direction.
To slew in an anticlockwise direction depress the opposite
end of the rocker switch.
CONTROLS 6
3 2 1
en-34