Engine Lubrication - Ransomes HR300 Kubota D1105T Sicherheits-, Bedienungs- Und Wartungshandbuch

8 MAINTENANCE AND LUBRICATION
8.2

ENGINE LUBRICATION ___________________________________________

Check Engine Oil Level
Check the engine oil level before starting or more than
five minutes after stopping the engine.
(a) With the machine on level ground, remove the
dipstick D, wipe it clean and replace.
(b) Take the dipstick D out again, and check the oil
level. It must be between level marks (E) on
dipstick.
Change Engine Oil.
(a) Warm up the engine first and then shut it off.
Remove oil drain plug (A) from the bottom of the
crankcase and wipe it off.
(b) Drain engine oil in to a suitable container.
(c) Replace the drain plug (A) and fill engine with the
correct quantity & grade of oil through one of the
fillers (B).
Change Engine Oil Filter
(a) Remove single-unit cartridge (C)
(b) Collect engine oil in a suitable container.
(c) Clean area on crankcase.
(d) Apply thin coat of oil to cartridge gasket before
installing.
(e) Tighten filter by hand only.
(f) Check for oil leaks around the cartridge gasket
after engine is started.
Contact With Engine Oil Can Damage Your
Skin. Use Gloves When Working With Engine
Oil. If You Come In Contact With Engine Oil,
Wash It Off Immediately.
Dispose Of Used Engine Oil In Accordance
With Local Regulations
en-63
CAUTION
CAUTION
D
B
C
A