Inhaltsverzeichnis
Werbung
Continue through all desired parameters, pres-
sing START/STOP to start workout.
Należy analogicznie skonfigurować pozostałe pa-
rametry i przejść do ćwiczenia naciskając START/
STOP.
Note: If Pulse is above or below (± 5) the TAR-
GET H.R, computer will adjust the resistance load
automatically. It will check Every 10 seconds ap-
prox. l resistance load will increase or decrease .
One of workout parameters counts down to be
zero, it will have bi sounds and stop the workout
automatically. Press START/STOP KEY to continue
the workout to reach unfinished workout para-
meter.
• USER PROGRAM
(P16-P19)
There are four user programs can be selec-
ted form U1 to U4.
User program allows user to set their own pro-
gram that can be used immediately
Setting Parameters for User Program
Selecting user using UP OR DOWN KEY then
pressing ENTER KEY . 1St parameter "Time" will
flash so value can be adjusted using UP OR DOWN
KEY .Press ENTER KEY to save value & move to
next parameter to be adjusted.
Continue through all desired parameters .
After finished set up desired parameter, the level
1 will flash, use UP OR DOWN KEY to adjust then
pressing ENTER until finished. ( There are 10
times total). Press START/STOP to start workout.
pozostałych parametrów, należy nacisnąć START.
Note:
One of workout parameters counts down to be
zero, it will have bi sounds and stop the workout
automatically. Press START/STOP KEY to conti-
12 |
nue the workout to reach unfinished workout
parameter.
5. PRODUCT MAINTENANCE:
• When you don't use the exercise bike for a
long time, please take out the console battery
to avoid running out of battery.
• Often clean the exercise bike with clean cloth
to keep the clean appearance..
• Regularly check that the elements fastened
with nuts and bolts are correctly tightened.
• Remember regularly to grease moving parts.
• Storing the equipment in a clean and dry
environment away from children.
EN | instruction
Werbung
Inhaltsverzeichnis
