Mechanical Installation; Installation Position - Renkforce dvd 6311 Bedienungsanleitung

Mechanical installation

Most vehicles are equipped with a radio slot. The position of the radio slot has been chosen taking safety aspects
into account. Therefore, it is advisable to install the device in the designated slot.
The device requires a DIN installation slot with the dimensions 182 x 53 mm; these dimensions are standardized and
usually the vehicle manufacturers keep to them.
Should there be no such slot, please ask your car dealer about the correct place of installation for your device.
Please choose the place of installation carefully so that the device neither influences the
driver's activity nor distracts him/her from traffic.
Only use the supplied installation material to guarantee a safe installation.
Any changes to the vehicle necessary for the installation of the DVD tuner or other components
must be carried out in such a way that neither traffic safety nor the stability of the vehicle are
affected. With many cars, the type approval will lapse if you merely saw out a section of the
sheet metal.
Since the device produces heat during operation, the place of installation must be heat-
resistant.
Before drilling attachment holes, make sure that no electric cables, brake lines, the fuel tank or
similar are damaged.
When you use tools to install your car hi-fi components, observe the manufacturer's safety
instructions.
When installing the car hi-fi system, take into consideration the risk of accident which can arise
from devices being torn away in the case of an accident. Therefore, fasten each part securely
in a location where it will not pose a risk to the passengers.

Before you install the device, check the depth of the designated installation slot.

Installation position

The angle of installation to the horizontal must be under 30°. If the inclination of the device is high, it might
malfunction.
55