Connecting The Loudspeakers To The Power Supply - Renkforce dvd 6311 Bedienungsanleitung

Connecting the loudspeakers to the power supply

The DVD tuner has an ISO system plug.
Vehicles equipped with such a system plug can be connected directly to the device if the pin assignment is the same
(please check before connection). If the assignments are different, you need to connect the device using an adapter.
Refer to the following illustrations for the pin assignment of the connection socket on the device.
Ask your car dealer for the assignment of your vehicle system plug.
System plug B (loudspeaker connection)
(1) Loudspeaker rear right (+)
(2) Loudspeaker rear right (-)
(3) Loudspeaker front right (+)
(4) Loudspeaker front right (-)
(5) Loudspeaker front left (+)
(6) Loudspeaker front left (-)
(7) Loudspeaker rear left (+)
(8) Loudspeaker rear left (-)
System plug A (power supply)
(1) Not assigned
(2) Not assigned
(3) Not assigned
(4) Continuous current +12 V
(5) Aerial control output
(6) Not assigned
(7) Ignition +12 V
(8) Ground
60
3
1
B
2 4
4
A
Operating Instructions

English
5 7
6 8
5 7
8