Orbea RALLON M-LTD Technisches Handbuch Seite 24

46 | ORBEA
SUSPEN S I ON S
AIR VOLUMEN REDUCERS ON FOX SHOCKS
You can adjust the progressivity of your shock installing
air volume reducers, which you can purchase from a Fox
authorized dealer.
FOX FLOAT X VOLUME REDUCER CONFIGURATION
REDUCERS VOLUME INSTALLED
SHOCK SIZE
* The Float X Factory Kashima shocks are delivered from Orbea with a 0.4 volume reducer in the accesories box to custo-
mize your shock. Consult the volume reducer installation method in the manufacturer´s documentation.
FOX FLOAT X2 VOLUME REDUCER CONFIGURATION
SHOCK SIZE
MAXIMUM REDUCERS VOLUME
FROM FACTORY
FACTORY INSTALLED MAXIMUM REDUCERS VOLUME
TECHNICAL MANUAL B LUE PAPER RALLON · 2022
FOX DHX2 SHOCKS SPRING WEIGHT AND SETTINGS
SUGGESTIONS
To adjust the SAG on Fox coil shocks, turn the coil preload
ring until the target SAG is achieved.
If you cannot achieve your target SAG with the preload
ring, you will need to try a different spring weight coil.
Once the target SAG is achieved, adjust the rebound and
compression.
Turn the compression or rebound dial to the closed posi-
tion (clockwise).
Then count clicks counter-clockwise as per the table below.
RIDER+GEAR
WEIGHT
(Kg)
65
75
85
95
LOW SPEED HIGH SPEED
SPRING WEIGHT
REBOUND REBOUND
(SPRING RATE)
LSR HSR
6-7
375 8-9 6-7
7-8 6-7
425 6-7 6-7
6-7 5-6
5-6 5-6
525 4-5 5-6
4-5 4-5
575 4-5 4-5
ORBEA | 47
EN
LOW SPEED HIGH SPEED
COMPRESSION COMPRESSION
LSC HSC
13-14 6-7
13-14 6-7
12-13 6-7
11-2 6-7
11-12 6-7
5-6
5-6
4-5
4-5