Orbea RALLON M-LTD Technisches Handbuch Seite 23

44 | ORBEA
SUSPE N SI O NS
SUGGESTED COMPRESSION SETTINGS FOX 38
FLOAT GRIP 2
ges in terrain, and is intended to be adjusted throughout
the ride. Turning the lever to the full counter-clockwise
position sets the fork in the Open mode. Turning the lever
to the middle detent position sets the fork in the Medium
mode. Turning the lever to the full clockwise position sets
the fork in Firm mode. FOX recommends beginning with
the 3-position lever in the Open mode. The positions be-
tween the Open, Medium, and Firm modes can be utilized
HIGH SPEED COMPRESSION LOW SPEED COMPRESSION
SUGGESTED SETTING (HSC) SUGGESTED SETTING (LSC)
5 CLICKS
FOX SHOCKS ADJUSTMENTS
Rallon in the manufacturer´s documentation:
Fox DHX2 / DHX shock manual
https://www.ridefox.com/fox17/help.php?m=bike&id=1146
Fox Float X shock manual
https://www.ridefox.com/fox17/help.php?m=bike&id=1147
Fox Float X2 shock manual
https://www.ridefox.com/fox17/help.php?m=bike&id=1148
FOX FLOAT X AND FLOAT X2 AIR PRESSURE RECOM-
MENDATIONS
values may change depending of riding style and terrain
conditions:
Adjust the shock´s air pressure until the desired SAG is
more support. A 33% SAG will provide a plusher riding
experience.
TECHNICAL MANUAL
SUGGESTED COMPRESSION SETTINGS FOX 38
FLOAT GRIP
-
-
ges in terrain, and is intended to be adjusted throughout
the ride. Turning the lever to the full counter-clockwise
position sets the fork in the Open mode. Turning the lever
to the middle detent position sets the fork in the Medium
mode. Turning the lever to the full clockwise position sets
the fork in Firm mode. The positions between the Open,
compression damping. The positions between the Open,
compression damping.
Recommended SAG
28% - 33%
measurement
SAG 28% on 230x60 shock. SAG 33% on 230x60 shock.
Equivalence in mm Equivalence in mm
18.8mm 18.8mm
Once the desired SAG is achieved, adjust the Rebound
and Compression (only Fox Float X2) depending on the air
pressure of your shock.
mended Rebound or Compression setting on the table be-
low. Turn the Reboud or Compression dial clockwise until
the Closed position.
Then count "click" as per the table below counter-clockwise.
B LUE PAP ER R AL LO N · 2022
FOX FLOAT X, FLOAT X2 SUGGESTED COMPRESSION AND REBOUND
ADJUSTMENTS
- Suggested compression and rebound settings
-
Based on air pressure once the target SAG has been reached.
FOX FLOAT X
Air Recommended Low speed
pressure rebound compression
(psi) setting (clicks)
9
8
7
6
5
4
3
2
1
-
** Turn the dial clockwise to add compression (Firm) and anti-clockwise to reduce the compression (Soft).
FOX FLOAT X2
Air Low speed High speed
pressure rebound rebound
LSC** (psi) LSR HSR
16-18 7-8
15-17 7-8
14-16 6-7
13-15 6-7
12-14 5-6
11-13 5-6
5-6
9-11 4-5
4-5
7-9 4-5
7-9 3-4
6-8 3-4
6-8 3-4
5-7 2-3
4-6 2-3
3-5 2-3
2-4 2-3
2-4 1-2
1-3 1-2
1-3 1-2
1-3
1-2
ORBEA | 45
E N
Low speed High speed
compression compression
LSC HSC
16-18 7-8
16-18 7-8
15-17 7-8
15-17 7-8
14-16 6-7
14-16 6-7
13-15 6-7
13-15 6-7
12-14 5-6
11-13 5-6
5-6
9-11 4-5
4-5
7-9 4-5
6-8 4-5
5-7 3-4
4-6 3-4
2-4 3-4
2-4 3-4
2-4 2-3
1-3 2-3
1-3 2-3