Orbea RALLON M-LTD Technisches Handbuch Seite 16

30 | ORBEA
LINKAGE
LINKAGE ASSEMBLY
6. Install the seatstays onto the linkage.
Apply grease only on the bolts´ body, not on the thread.
Apply medium strength threadlock on the bolts threads.
5
6
5
GREASE
Do not apply grease
on thread
8.
preload bolt.
9.
10.
yoke bolts.
11.
tays bolts.
11
5
10 N.m
TECHNICAL MANUAL
7. Install the shock yoke (29" or Mullet). Install the spa-
cers o-rings onto the spacers before installing the linka-
ge-shock yoke spacers.
Apply grease only on the bolts´ body, not on the thread.
Apply medium strength threadlock on the bolts threads.
GREASE
Do not apply grease
on thread
7
8
GREASE
-
8
10
12 N.m
8
4 N.m
9
B LUE PAP ER R AL LO N · 2022
SHOCK AND YOKE ASSEMBLY
GEOMETRY CHANGE AND 29" / MULLET SETUPS
SHOCK ASSEMBLY
Do not apply grease on thread
GREASE
1 8 SHOCK-FRAME FIXING KIT RALLON 22
For 29" and Mullet
ART Nº: XA30
18.1 Shock yoke bolt (M8xP1) (29" and Mullet)
18.2
(Not used with mullet yoke)
4
18.3
(Not used with mullet yoke)
18.4 Shock-frame bolt (M8xP1)
18.5 Shock-frame washer
5
10 N.m
5
18.1
8 N.m
18.2
18.3
Always follow the recommended
torque settings.
QTY.
1
1
1
1
1
ORBEA | 31
E N
18.5
18.4
5
10 N.m
Do not apply grease on thread
GREASE