Orbea RALLON M-LTD Technisches Handbuch Seite 20

38 | ORBEA
LOCKR ZONES
INSTALLING A BOTTLE HOLDER ONTO THE LOCKR COVER
It is necessary to remove the LOCKR cover from the frame to install a bottle holder on it. If the cover is not
Orbea recommends the use of a lateral extraction bottle holder to make the extraction of the bottle easier.
1-2. Turn the LOCKR cover lever and remove the cover
from the frame.
2
1
OPEN
4-5. Install the bottle holder to the LOCK cover using the
original bolts. Install the lower cover tab and spa-
cer(s) with the lower bottle holder bolt.
4
3
4 N.m
5
TECHNICAL MANUAL
3. Remove the bottle holder bolts. The lower cover tab and
spacer(s) will fall off the cover.
3
6-7.
position by turning the cover lever.
6
7
CLOSED
B LUE PAP ER R AL LO N · 2022
LOCKRS COVER EXPLODED VIEW
* Check the LOCKR zones spares in the next section.
28.1
3
28.13
4 N.m
28.14
28.2
28.9
28.3
4
28.10
28.4
4 N.m
28.5
ORBEA | 39
E N
28.8
28.7
2.5
28.12
3 N.m
28.6
4
28.11
4 N.m