Orbea RALLON M-LTD Technisches Handbuch Seite 21

40 | ORBEA
LOCKR ZONES
LINKAGE AXLE MULTITOOL
Rallon sports an OC multitool housed within the linkage axle and held in place by magnets in the multitool and the
linkage preload bolt.
The multitool has a 2mm, 3mm, 4mm and 5 mm Allen keys.
REAR AXLE REMOVABLE LEVER.
The rear axle lever is removable. It contains a 6mm Allen key and a Presta valve core removal tool to add tubeless sealant
to your tyres or help you seating them in the rim.
Allen 6 mm
Tubeless valve tool
TECHNICAL MANUAL B LUE PAPER RALLON · 2022
LOCKR ZONES SPARES
2 8 LOCKR COVER RALLON. BLACK
ART Nº: XA37
MAGNET
The LOCKR cover assembly is only available in black as a replacement or
aftermarket article.
QTY.
28.1 Cover lever LOCKR Rallon OMR 1
28.2 LOCKR cover Rallon OMR. Black 1
28.3 Lower cover tab 1
28.4 Tool holder 1
28.5 Tool holder rubber band 1
28.6 Frame tab 1
28.7 Upper cover tab 1
28.8 Lever spacer. Round 1
28.9 Tab spacer. Rectangular 1
Bolt M5x8 DIN7991 tool holder 1
28.11 Bolt M5x8 DIN7991 lever 1
28.12 1
28.13 1
28.14 1
The LOCKR cover assembly is served as a
spare with one rectangular spacer (28.9).
However, the orignal cover may have 1 or no
spacer installed, depending on the orignal
frame tolerances. Install as many rectangu-
lar spacers as the original cover had. If you
do not know whether the original cover had
a spacer installed, install the spacer. If when
installing the cover in the downtube there is
any play, remove the spacer.
ORBEA | 41
27 ORBEA LOCKR TOOLBAG KIT
ART Nº: XA39
27.1 Toolbag Orbea LOCKR nylon
27.2 Toolbag Orbea LOCKR neoprene
30 MULTITOOL OC LINKAGE AXLE
ART Nº: XA14
Multitool OC linkage axle
3 1 REAR AXLE LEVER RALLON ALLEN 6mm
ART Nº: XA40
Rear axle lever Rallon allen 6mm
EN
QTY.
1
1
QTY.
1
QTY.
1