Orbea RALLON M-LTD Technisches Handbuch Seite 19

36 | ORBEA
LOCKR ZONES
TOOL STORAGE
various zones of the frame to empty your pockets and
backpack, knowing that you always carry all the necessary
items for your ride.
There are three LOCKR zones in the frame:
· Downtube storage accessible through the LOCKR cover.
· Multitool housed within the linkage axle.
· Rear axle detachable lever.
2
1
OPEN
TECHNICAL MANUAL
DOWNTUBE STORAGE
To access the downtube storage, turn the LOCKR cover
lever and remove the cover. The tools and spares in the
downtube are stored into two bags (a neoprene and a nylon
bag) to avoid noise during the ride.
The nylon bag is designed to be positioned in the upper
part of the downtube and can keep a tube (adequately fol-
ded) and two tyre levers (in the two pockets to that use).
The neoprene bag is positioned in the lower part of the
downtube and is designed to store one or two CO2 car-
tridges and their adapter and a small multitool or pump.
The tools and spares that can be stored in the
downtube will greatly depend on their dimen-
sions. Use the LOCKR zone in whatever way
B LUE PAP ER R AL LO N · 2022
UPPER BAG
Use the velcro strap to join both bags together inside the downtube to stop them from moving within the frame and to pull
You can also use the rubber band beneath the LOCKR
cover to hold small articles, such a tubeless repair kit or
other items.
ORBEA | 37
LOWER BAG
To avoid noises, it may be necessary not to
use all the space available in the bag and
thus be able to fold it before introducing it
into the downtube so the tools do not move
freely during your ride.
E N