EN
4. Transport and handling
4.1.6 Lifting angle
The angle between the tie rods changes the applied load according to the following diagram:
Note: we recommend using angles less than 60°.
4.2 Transport and handling
4.2.1 Transport conditions
The packaged unit is secured and packed in such a way as to prevent movement, impact and damage during
transport.
4.2.2 Packaging content
The packaged unit is placed in a single package, complete with all electrical connections. The contents of the
packaging are as follows:
packaged unit
l
door switch with retainer
l
fastening kit
l
template to be used for installation
l
coldroom light
l
4.2.3 Storage
The packed packaged unit must be stored indoors or covered to avoid exposure to atmospheric agents.
4.2.4 Lifting the packaged unit
The center of gravity is indicated on the packaged unit packaging. Use the lifting eyebolts [A] on the frame.
98
BEST W R290
Instruction manual
Rev.
v. 00 | 9600-0033
© 2020 RIVACOLD srl
|